FRONT DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX


    1. With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.

    2. Check that there is no foreign matter inside the speaker.

    3. Check that the speaker cone is not damaged.

    4. B000UHCC07
      *a

      Component without harness connected

      (No. 1 Speaker Assembly with Box)

      for 12 Speakers:


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4 Ω

        If the result is not as specified, replace the No. 1 speaker assembly with box.

    5. B000UQPC01
      *a

      Component without harness connected

      (No. 1 Speaker Assembly with Box)

      for 13 Speakers:


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4.3 to 6.3 Ω

        If the result is not as specified, replace the No. 1 speaker assembly with box.