HEATED STEERING WHEEL CONTROLLER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. Move the lower steering wheel boss cover to a position where the steering wheel heater control assembly and screw can be removed.

      Note


      • Work carefully so that the heater thermistor does not come off the lower steering wheel boss cover.

      • If the heater thermistor comes off the lower steering wheel boss cover, replace the steering wheel assembly.

    2. Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.

      Note


      • Work carefully so that the heater thermistor does not come off the lower steering wheel boss cover.

      • If the heater thermistor comes off the lower steering wheel boss cover, replace the steering wheel assembly.

    3. Engage the guide to install the wire harness to the lower steering wheel boss cover.

    4. Connect the connector.

  2. CONNECT LOWER STEERING WHEEL BOSS COVER


    1. Attach the 2 claws.

    2. Install the lower steering wheel boss cover with the 2 screws.

  3. INSTALL STEERING WHEEL ASSEMBLY

    Click here