STEERING COLUMN ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY


    1. Using a drill, drill a hole in each steering lock set bolt and insert a screw extractor.

    2. B000Z4B

      Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator or upper bracket assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. B000YWX

      Disengage the 2 claws and guide to remove the multiplex tilt and telescopic ECU from the steering column assembly.

  3. REMOVE CUSHION


    1. B000YWC

      Remove the cushion from the tilt motor.