ELECTRIC PARKING BRAKE ECU INSTALLATION

PROCEDURE

1. INSTALL ELECTRIC PARKING BRAKE ECU

   
   

   1. Install the electric parking brake ECU with the nut.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the 2 connector to the electric parking brake ECU.

2. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

3. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

4. INSTALL NO.1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

5. INSTALL LUGGAGE COMPARTMENT TRIM BOX

   Click here

6. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

7. INSTALL REAR FLOOR FINISH PLATE

   Click here

8. INSTALL NO. 1 DECK BOARD

   Click here

9. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. INSTALL NO. 2 DECK BOARD

    Click here

11. PERFORM INITIALIZATION

    Click here