| DTC | Trouble Area | Brake Warning Light / Yellow (Minor Malfunction) | Parking Brake Indicator Light (Red) | Fail-safe Deactivation Condition |
|---|---|---|---|---|
| C1245/62 | Deceleration sensor data malfunction | Illuminates | Normal | Engine switch off |
| C13A0/11 | Open in power supply relay circuit | Illuminates | Refer to condition 1 on attached sheet | Engine switch off |
| C13A1/12 | Short in power supply relay circuit | Illuminates | Normal | Engine switch off |
| C13A2/22 | Engine switch malfunction | Illuminates | Normal | Engine switch off |
| C13A3/31 | Open or short in lock switch circuit | Illuminates | Refer to condition 2 on attached sheet | Engine switch off |
| C13A4/32 | Open or short in release switch circuit | Illuminates | Refer to condition 1 on attached sheet | Electric parking brake switch assembly normal |
| C13A5/41 | Parking brake motor current monitor malfunction | Illuminates | Refer to condition 2 on attached sheet | Engine switch off |
| C13A6/42 | Open or short in circuit of motor | Illuminates | Refer to condition 1 on attached sheet | Engine switch off |
| C13A7/43 | Parking brake actuator malfunction | Illuminates | Blinks | Recovery not possible until parking brake with bracket actuator assembly becomes normal |
| C13A8/44 | Tension sensor malfunction | Illuminates | Blinks | Engine switch off (recovery not possible after release control performed during malfunction) |
| C13A9/61 | Electronically controlled brake system malfunction | Illuminates | Normal | Electronically controlled brake system recovers normally |
| C13AA/71 | Electric parking brake high temperature | Does not illuminate | Blinks | Wait 1 minute |
| C13AB/33 | Lock switch circuit | Illuminates | Refer to condition 2 on attached sheet | Engine switch off |
| C13AC/34 | Release switch circuit | Illuminates | Refer to condition 1 on attached sheet | Electric parking brake switch assembly normal |
| C13AD/23 | Open in +B circuit | Illuminates | Refer to condition 1 on attached sheet | Engine switch off |
| C13AE/72 | System information not received | Illuminates | Blinks | System information received |
| C13B0 | Electric parking brake ECU assembly malfunction | Illuminates | Normal (flashes when EEPROM malfunction occurs) | Recovery not possible until parking brake ECU assembly becomes normal |
| U0073/51 | Control module communication bus OFF | Illuminates | Normal | Engine switch off |
| U0100/53 | Lost communication with ECM | Illuminates | Normal | Communication normal, engine switch off |
| U0124/55 | Lost communication with deceleration sensor (yaw rate sensor) | Illuminates | Normal | Communication normal, engine switch off |
| U0129/52 | Lost communication with skid control ECU assembly | Illuminates | Normal | Communication normal |
Tech Tips
Normal: Illuminates when locked, turns off when released
The parking brake indicator light (red) condition changes according to the customer's operation.
| Customer's Operation | Parking Brake Indicator Light (Red) Condition | |
|---|---|---|
| Condition 1 | Condition 2 | |
| Shift position D → P | Blinks | Blinks |
| Shift position P → D | Blinks | Does not illuminate |
| Lock operation | Blinks | Blinks |
| Release operation | Blinks | Does not illuminate |
| Shift position held in D | Does not illuminate | Does not illuminate |
| Shift position held in P | Illuminates | Illuminates |