BRAKE PEDAL STROKE SENSOR(for LHD) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during brake pedal stroke sensor assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Battery terminal is disconnected/reconnected Memorize steering angle neutral point LKA /LDA system

Click here

Pre-collision system
Parking assist monitor system

Click here

Steering sensor zero point calibration Variable gear ratio steering system

Click here

Brake pedal stroke sensor assembly

  • Clear stored linear solenoid valve calibration data

  • Perform initialization and calibration of the linear solenoid valve

  • DTCs are stored

  • ABS warning light illuminates

  • Brake warning light/yellow (minor malfunction) illuminates

  • Slip indicator light illuminates

  • VSC disabled or malfunctions

CAUTION / NOTICE / HINT

Note

While the battery is connected, even if the engine switch is off, the brake control system activates when the brake pedal is depressed or the door courtesy switch turns on. Therefore during servicing of the brake system components, do not operate the brake pedal and open/close the doors while the battery is connected.

PROCEDURE


  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  2. REMOVE STEERING ACTUATOR ASSEMBLY (w/ VGRS)

    Click here

  3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    1. B000WJY

      Disconnect the connector from the brake pedal stroke sensor assembly.

    2. Remove the 2 nuts and brake pedal stroke sensor assembly from the brake pedal support assembly.

      Note


      • Do not drop the brake pedal stroke sensor assembly.

      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.