REAR STABILIZER BAR INSTALLATION

PROCEDURE

1. INSTALL REAR STABILIZER BAR

   
   

   1. 

      Install the rear stabilizer bar with the 4 bolts.

      Torque:

      51 N*m  { 520 kgf*cm, 38 ft.*lbf }

      Note

      Temporarily tighten the bolt (A), and then fully tighten the 4 bolts in the order of (B), (C), (D), and (A).

2. INSTALL REAR STABILIZER LINK ASSEMBLY LH

   Click here

3. INSTALL REAR STABILIZER LINK ASSEMBLY RH

   Tech Tips

   Perform the same procedure as for the LH side.

4. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

   Click here