FRONT STABILIZER BAR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. REMOVE STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. B000TQR

      Remove the 2 nuts and front stabilizer link assembly LH from the lower No. 2 suspension arm assembly LH and front stabilizer bar.

      Tech Tips

      If the ball joint turns together with the nut, use a 8 mm hexagon wrench to hold the stud bolt.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  6. REMOVE FRONT STABILIZER BAR


    1. B000X79

      Remove the 4 bolts and front stabilizer bar.

      Tech Tips

      The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.