REAR UPPER ARM ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT REAR NO. 1 SUSPENSION ARM ASSEMBLY LH


    1. Check for looseness.


      1. Lift up the vehicle.

      2. B000VW8

        Move the rear No. 1 suspension arm assembly LH up and down then left and right by hand to check that there is no looseness at the rear No. 1 suspension arm assembly LH.

  2. INSPECT REAR UPPER CONTROL ARM ASSEMBLY LH


    1. Check for looseness.


      1. Lift up the vehicle.

      2. B000Y5W

        Move the rear upper control arm assembly LH up and down then left and right by hand to check that there is no looseness at the rear upper control arm assembly LH.