DIFFERENTIAL MOUNT CUSHION REMOVAL

PROCEDURE


  1. REMOVE DIFFERENTIAL CARRIER ASSEMBLY REAR

    Click here

  2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 1 differential mount cushion.

      SST
      09570-24011
      09570-60010
      B000UKQC01
      *a SST (09570-24011) *b SST (09570-60010)
      B000XM7 SST bolt location B000TT4 Front of the Vehicle

      Note


      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      Tech Tips

      Install the 2 SST bolts to the 2 SST holes as shown in the illustration.