REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE REAR STEERING LINK ASSEMBLY (w/ Dynamic Rear Steering)

    Click here

  3. REMOVE REAR DRIVE SHAFT ASSEMBLY


    1. Remove the rear drive shaft assembly LH and rear drive shaft assembly RH.

      Click here

  4. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  5. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Note


    • Do not damage the installation surface when removing the rear differential carrier assembly.

    • The remaining oil may leak out when removing the rear differential carrier assembly.

    • Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

    • Remove the bolts with the rear differential carrier assembly secured.


    1. B000YOEN02

      Support the rear differential carrier assembly with a transmission jack.

      CAUTION:

      The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.

    2. Using a 12 mm socket hexagon wrench, remove the 2 bolts (B).

    3. Remove the 2 bolts (A), 2 rear upper differential mount stoppers, 2 rear lower differential mount stoppers and rear differential carrier assembly.