REAR DIFFERENTIAL CARRIER ASSEMBLY COMPONENTS

ILLUSTRATION

B000Z6TC02
*1 REAR DIFFERENTIAL CARRIER ASSEMBLY *2 REAR DIFFERENTIAL DYNAMIC DAMPER
*3 REAR UPPER DIFFERENTIAL MOUNT STOPPER *4 REAR LOWER DIFFERENTIAL MOUNT STOPPER
B000XAB Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) B000Y3N N*m (kgf*cm, ft.*lbf): Specified torque
● Non-reusable part B000YW9 Do not apply lubricants to the threaded parts

ILLUSTRATION

B000Z8FC02
*1 REAR DIFFERENTIAL BREATHER PLUG *2 REAR DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
*3 REAR DIFFERENTIAL CARRIER COVER *4 REAR DIFFERENTIAL CARRIER OIL SEAL
*5 REAR DIFFERENTIAL CARRIER STRAIGHT PIN *6 REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
*7 REAR DIFFERENTIAL DRIVE PINION OIL SLINGER *8 REAR DIFFERENTIAL DUST DEFLECTOR
*9 REAR DIFFERENTIAL SIDE GEAR SHAFT SNAP RING *10 REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
*11 REAR DRIVE PINION FRONT BEARING *12 REAR DRIVE PINION NUT
*13 REAR DRIVE SHAFT OIL SEAL LH *14 REAR DRIVE SHAFT OIL SEAL RH
*15 REAR DIFFERENTIAL DRAIN PLUG *16 GASKET
*17 REAR DIFFERENTIAL FILLER PLUG *18 REAR DIFFERENTIAL CARRIER
*T1 Preload adjusting torque: 550 N*m (5608 kgf*cm, 406 ft.*lbf) or less - -
B000XAB Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) B000Y3N N*m (kgf*cm, ft.*lbf): Specified torque
● Non-reusable part B000XM7 Hypoid gear oil LSD

ILLUSTRATION

B000X7FC02
*1 DIFFERENTIAL DRIVE PINION *2 DIFFERENTIAL OIL STORAGE RING
*3 DIFFERENTIAL RING GEAR *4 REAR DIFFERENTIAL CASE BEARING
*5 REAR DIFFERENTIAL CASE SUB-ASSEMBLY *6 REAR DRIVE PINION REAR BEARING
*7 REAR DIFFERENTIAL DRIVE PINION PLATE WASHER - -
*T1

1st: 63.7 N*m (650 kgf*cm, 47 ft.*lbf)

2nd: 60° to 90°

 - -
B000Y3N N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part
B000XM7 Hypoid gear oil LSD B000TT4 Toyota Genuine Adhesive 1360K, Three Bond 1360K or equivalent.
★ Precoated part - -