PARKING LOCK RELEASE CABLE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 CONSOLE BOX SUPPORT

    Click here

  2. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    Click here

  3. REMOVE UPPER NO. 1 CONSOLE SUPPORT BRACKET

    Click here

  4. REMOVE THROTTLE LINK CONNECTING ROD ASSEMBLY


    1. B000UAXC01
      B000XM7 Bolt
      B000TT4 Nut and Spring Washer

      Remove the nut, spring washer and 2 bolts and disconnect the throttle link connecting rod assembly from the shift control actuator assembly.

    2. B000VFJC01
      *1 Cover
      B000WYJ Disconnect

      Detach the 2 claws and disconnect the cover from the throttle link connecting rod assembly as shown in the illustration.

    3. B000Z9MC01
      *1 Parking Lock Release Lever Assembly Cable End
      *2 Throttle Link Connecting Rod Assembly Cable End

      Disconnect the parking lock release lever assembly cable end from the throttle link connecting rod assembly cable end.

    4. B000XVC

      Remove the 2 bolts and throttle link connecting rod assembly from the No. 2 parking release cable bracket sub-assembly.

  5. REMOVE TRANSMISSION LEVER OUTER


    1. B000U5T

      Remove the nut, spring washer and transmission lever outer from the throttle link connecting rod assembly.

  6. REMOVE PARKING LOCK RELEASE LEVER ASSEMBLY


    1. B000V3W

      Remove the nut and No. 1 parking lock release cable clamp bracket from the body.

    2. B000WKKC01
      *a Protector

      Remove the No. 1 parking lock release cable clamp bracket from the parking lock release lever assembly protector.

    3. B000Z3UC01
      *A for LHD
      *B for RHD

      Remove the 4 bolts and pull out the parking lock release lever assembly from the floor panel through holes to remove it.

      Tech Tips


      • Do not damage the cable with the floor panel through holes.

      • Do not bend the cable.

  7. REMOVE NO. 2 PARKING RELEASE CABLE BRACKET SUB-ASSEMBLY

    Tech Tips

    There is no need to remove this unless the No. 2 parking release cable bracket sub-assembly is replaced.


    1. B000V2Y

      Remove the 2 bolts and No. 2 parking release cable bracket sub-assembly from the engine rear mounting member.