ELECTRONIC SHIFT LEVER SYSTEM Battery Low Voltage

CAUTION / NOTICE / HINT

Note

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

PROCEDURE


  1. CHECK BATTERY


    1. Check the battery.

      Click here

      Result
      Result Proceed to
      Battery is OK A
      Recharge battery
      Replace battery B

    B

    REPLACE BATTERY Click here

    A

  2. CHARGE BATTERY


    1. Charge the battery.

      Result
      Proceed to
      NEXT

    NEXT

    GO TO STEP 4 Click here

  3. REPLACE BATTERY


    1. Replace the battery.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK OPERATION


    1. Turn the engine switch on (IG).

    2. With the brake pedal depressed, move the shift lever to select neutral (N).

    3. Push the P position switch (shift position indicator) to select park (P).

    4. Turn the engine switch off.

    5. Leave the vehicle as is for 60 seconds or more.

      Note


      • Do not connect the GTS.

      • Do not depress brake pedal.

      • Do not open/close any of the doors.

    6. Check that the electronic shift lever system operates correctly.

      Result
      Proceed to
      NEXT

    NEXT

    END