ELECTRONIC SHIFT LEVER SYSTEM, Diagnostic DTC:P1C8E49

DTC Code DTC Name
P1C8E49 Park Pawl Motor Control System (Driving Request) Internal Electronic Failure

DESCRIPTION

Refer to the description for DTC P1C8949.

Click here

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1C8E49 Park Pawl Motor Control System (Driving Request) Internal Electronic Failure

When the engine switch is on (IG) and current commands to the shift control actuator assembly (parking lock motor) occurs continuously for 15 seconds or more.

(1 trip detection logic)

 Shift control ECU Does not come on

  • Master Warning Light


    • Comes on

  • Multi-information Display Error Message


    • Displayed

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.

Click here


  1. Turn the engine switch on (IG).

  2. Depress the brake pedal and move the shift lever to select neutral (N).

  3. Push the P position switch (shift position indicator) to select park (P).

CAUTION / NOTICE / HINT

Note

The vehicle is equipped with a sub-battery. Therefore, ensure there is no power being supplied to the vehicle when disconnecting or reconnecting the connector of the shift control ECU and when removing or installing the shift control ECU.

Click here

PROCEDURE


  1. REPLACE SHIFT CONTROL ECU

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    END