BACK DOOR COURTESY SWITCH INSTALLATION

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. B000Z1K

      Apply MP grease to the sliding parts of the luggage compartment door lock assembly.

    2. Attach the clamp and install the luggage compartment door lock assembly to the luggage door lock control cable.

    3. B000YNLC01
      B000WYJ Install in this Direction (1)
      B000YNM Install in this Direction (2)

      Insert the luggage compartment door lock assembly through the service hole at an angle and install it while sliding it through.

    4. Install the luggage compartment door lock assembly with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    5. Connect the connector.

  2. INSTALL BACK DOOR LOCK PROTECTOR


    1. Install the back door lock protector.

  3. INSTALL REAR FLOOR FINISH PLATE

    Click here

  4. INSTALL NO. 1 DECK BOARD

    Click here