BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. B000YDRC02
      *a

      Component without harness connected

      (Luggage Compartment Door Lock Assembly)

      Inspect the back door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (E) - 4 (D+)

        Latch unlock

        (Luggage door open)

        		 Below 1 Ω

        Latch lock

        (Luggage door close)

        		 10 kΩ or higher
        If the result is not as specified, replace the luggage compartment door lock assembly.