FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL COURTESY LIGHT SWITCH


    1. B000WV9

      Connect the connector.

    2. Remove the tape to prevent wire harness from falling wire harness.

    3. Using a T30 "TORX" socket wrench, install the courtesy light switch with the "TORX" screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }
      B000UADC01
      B000WCG Tape to prevent wire harness from falling B000WYJ Install in this Direction