AMBIENT LIGHT(for Front Door) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (for Driver Side)


    1. Connect the connector.

    2. Connect the front door remote control cable assembly LH to the front door inside handle sub-assembly LH.

    3. B000YY2C01
      B000WYJ Install in this Direction

      Attach the hook to set the front door trim board sub-assembly LH.

    4. Attach the clip.

    5. Install the 2 screws.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH (for Front Passenger Side)


    1. Connect the connector.

    2. Connect the front door remote control cable assembly RH to the front door inside handle sub-assembly RH.

    3. B000TVTC01
      B000WYJ Install in this Direction

      Attach the hook to set the front door trim board sub-assembly RH.

    4. Attach the clip.

    5. Install the 3 screws.

  3. INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH (for Driver Side)

    Click here

  4. INSTALL FRONT DOOR ASSIST GRIP ASSEMBLY RH (for Front Passenger Side)

    Click here

  5. INSPECT POWER WINDOW OPERATION

    Click here