AMBIENT LIGHT(for Front Door) INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. B000XQMC08
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly LH)

      Inspect the front door trim board sub-assembly LH.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1 (+)

        Negative (-) → 2 (-)

        		 Ambient illumination light LH illuminates
        If the result is not as specified, replace the front door trim board sub-assembly LH.

  2. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    1. B000XQMC08
      *a

      Component without harness connected

      (Front Door Trim Board Sub-assembly RH)

      Inspect the front door trim board sub-assembly RH.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1 (+)

        Negative (-) → 2 (-)

        		 Ambient illumination light RH illuminates
        If the result is not as specified, replace the front door trim board sub-assembly RH.