OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. SEPARATE OIL COOLER TUBE


    1. B000UX2

      Remove the 2 bolts and separate the oil cooler tube.

  3. REMOVE CRANK POSITION SENSOR BRACKET


    1. B000XBR

      Detach the clamp.

    2. Remove the bolt and crank position sensor bracket.

  4. REMOVE ENGINE OIL LEVEL SENSOR


    1. B000V6V

      Disconnect the engine oil level sensor connector.

    2. B000YLX

      Remove the 4 bolts.

    3. B000V9P

      Rotate the engine oil level sensor 180° counterclockwise and remove it from the oil pan sub-assembly.

    4. B000X7NC10
      *a Cutting Position
      *b Supply Part

      Cut off the gasket as shown in the illustration.

    5. Remove the gasket from the engine oil level sensor.

      Tech Tips

      After cutting off the portions of the gasket shown in the illustration, remove only the outer part of the gasket.