THERMOSTAT REMOVAL

PROCEDURE

1. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

2. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH

   Click here

3. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH

   Click here

4. REMOVE LOWER RADIATOR AIR DEFLECTOR

   Click here

5. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

   Click here

6. REMOVE ENGINE UNDER COVER REINFORCEMENT

   Click here

7. DRAIN ENGINE COOLANT

   Click here

8. REMOVE RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY LH

   Click here

9. REMOVE RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY RH

   Click here

10. REMOVE AIR CLEANER WITH ELEMENT ASSEMBLY RH

    Click here

11. DISCONNECT NO. 2 PCV HOSE

    Click here

12. DISCONNECT NO. 3 PCV HOSE

    Click here

13. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

14. REMOVE INTAKE AIR CONNECTOR PIPE

    Click here

15. DISCONNECT NO. 3 RADIATOR HOSE

    Click here

16. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

    
    

    1. 

       Remove the 3 nuts and water inlet with thermostat sub-assembly from the water inlet housing.

    2. Remove the No. 2 water inlet housing gasket from the water inlet with thermostat sub-assembly.