INTAKE MANIFOLD COMPONENTS
ILLUSTRATION
| *1 | AIR CLEANER HOSE CLAMP | *2 | AIR CLEANER WITH ELEMENT ASSEMBLY LH |
| *3 | AIR CLEANER WITH ELEMENT ASSEMBLY RH | *4 | INTAKE AIR CONNECTOR PIPE |
| *5 | INTAKE AIR SOUND CREATOR | *6 | NO. 2 ENGINE UNDER COVER ASSEMBLY |
| *7 | NO. 2 INTAKE AIR CONNECTOR PIPE | *8 | RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY LH |
| *9 | RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY RH | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | ENGINE WIRE | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | FUEL VAPOR FEED HOSE | *4 | INJECTOR DRIVER |
| *5 | INJECTOR DRIVER BRACKET | *6 | NO. 5 ENGINE WIRE |
| *7 | PURGE VSV | *8 | VACUUM HOSE SUB-ASSEMBLY |
| *9 | WATER BY-PASS PIPE SUB-ASSEMBLY | *10 | HEATER WATER INLET HOSE |
| *11 | HEATER WATER OUTLET HOSE | *12 | NO. 3 WATER BY-PASS HOSE |
| *13 | WATER BY-PASS HOSE | *14 | NO. 5 WATER BY-PASS HOSE |
| *15 | NO. 1 FUEL VAPOR FEED HOSE | *16 | WIRE HARNESS CLAMP BRACKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | INJECTOR VIBRATION INSULATOR | *4 | INTAKE AIR SURGE TANK ASSEMBLY |
| *5 | NO. 1 DELIVERY PIPE SPACER | *6 | NO. 1 FUEL PIPE SUB-ASSEMBLY |
| *7 | NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY | *8 | PCV HOSE |
| *9 | PORT FUEL INJECTOR ASSEMBLY | *10 | WIRE HARNESS CLAMP BRACKET |
| *11 | NO. 1 INTAKE MANIFOLD TO HEAD GASKET | *12 | NO. 6 ENGINE WIRE |
| *13 | NO. 7 ENGINE WIRE | *14 | EFI FUEL PIPE CLAMP |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |