FUEL INJECTOR(for Port Injection) COMPONENTS
ILLUSTRATION
| *1 | AIR CLEANER HOSE CLAMP | *2 | AIR CLEANER WITH ELEMENT ASSEMBLY LH |
| *3 | AIR CLEANER WITH ELEMENT ASSEMBLY RH | *4 | INTAKE AIR CONNECTOR PIPE |
| *5 | INTAKE AIR SOUND CREATOR | *6 | NO. 2 ENGINE UNDER COVER ASSEMBLY |
| *7 | NO. 2 INTAKE AIR CONNECTOR PIPE | *8 | RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY LH |
| *9 | RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY RH | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | ENGINE WIRE | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | NO. 1 INJECTOR DRIVER | *4 | NO. 2 INJECTOR DRIVER |
| *5 | INJECTOR DRIVER BRACKET | *6 | PURGE VALVE (PURGE VSV) |
| *7 | WATER BY-PASS PIPE SUB-ASSEMBLY | *8 | HEATER WATER OUTLET HOSE |
| *9 | HEATER WATER INLET HOSE | *10 | WATER BY-PASS HOSE |
| *11 | NO. 3 WATER BY-PASS HOSE | *12 | NO. 5 WATER BY-PASS HOSE |
| *13 | FUEL VAPOR FEED HOSE | *14 | NO. 1 FUEL VAPOR FEED HOSE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | FUEL TUBE SUB-ASSEMBLY |
| *3 | INJECTOR VIBRATION INSULATOR | *4 | NO. 1 DELIVERY PIPE SPACER |
| *5 | NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY | *6 | NO. 2 FUEL TUBE SUB-ASSEMBLY |
| *7 | PORT FUEL INJECTOR ASSEMBLY | *8 | FUEL PIPE CLAMP |
| *9 | NO. 2 FUEL PIPE CLAMP | *10 | NO. 6 ENGINE WIRE |
| *11 | NO. 7 ENGINE WIRE | *12 | O-RING |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |