HEATED OXYGEN SENSOR INSPECTION

PROCEDURE


  1. INSPECT HEATED OXYGEN SENSOR


    1. B000VWDC01
      *A for Bank 1
      *B for Bank 2
      *a

      Component without harness connected

      (Heated Oxygen Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      1 (HT1B) - 2 (+B)

      1 (HT2B) - 2 (+B)

      		 20°C (68°F) 11 to 16 Ω

      1 (HT1B) - 4 (E2)

      1 (HT2B) - 4 (E2)

      		 Always 10 kΩ or higher

      If the result is not as specified, replace the heated oxygen sensor.