ENGINE OIL TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH

    Click here

  3. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH

    Click here

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR

    Click here

  5. DRAIN ENGINE OIL

    Click here

  6. DISCONNECT NO. 2 PCV HOSE

    Click here

  7. DISCONNECT NO. 3 PCV HOSE

    Click here

  8. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  9. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. B000YVU

      Disconnect the engine oil temperature sensor connector.

    2. B000YBW

      Using a 22 mm ball joint lock nut wrench, remove the engine oil temperature sensor from the oil filter bracket sub-assembly.

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.