MASS AIR FLOW METER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. for Bank 2:

      
      

      1. Install the mass air flow meter sub-assembly with the 2 screws.

         Note

         
         

         • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

         • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

         • Make sure that the O-ring is not cracked or does not move out of place during installation.

   2. for Bank 1:

      
      

      1. Install the mass air flow meter sub-assembly with the 2 screws.

      2. Connect the mass air flow meter sub-assembly connector.

         Note

         
         

         • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

         • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

         • Make sure that the O-ring is not cracked or does not move out of place during installation.

2. INSTALL AIR CLEANER WITH ELEMENT ASSEMBLY RH

   Click here

3. INSTALL RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY RH

   Click here

4. INSTALL LOWER RADIATOR AIR DEFLECTOR

   Click here

5. INSTALL RADIATOR SUPPORT TO FRAME SEAL LH

   Click here

6. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH

   Click here

7. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here