IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SPARK PLUG

   Click here

2. INSTALL IGNITION COIL ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing an ignition coil assembly.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. Install the 8 ignition coil assemblies to the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH with the 8 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

   2. Connect the 8 ignition coil assembly connectors.

3. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here