ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT HOOD LOCK ASSEMBLY


    1. B000U74C02
      *a Engine hood close
      *b Engine hood open
      *c

      Component without harness connected

      (Hood Lock Assembly (engine hood courtesy switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Open 10 kΩ or higher
      Close Below 1 Ω

      If the result is not as specified, replace the hood lock assembly (engine hood courtesy switch).