DOOR CONTROL RELAY(w/ Double Locking System) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY

   
   

   1. Connect the connector.

   2. Attach the guide to install the double lock door control relay assembly with the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

   Click here

4. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL NO. 2 FRONT DOOR OPENING TRIM COVER LH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

9. INSTALL BOX PANEL SUB-ASSEMBLY

   Click here

10. INSTALL UPPER CONSOLE BOX

    Click here

11. INSTALL SHIFTING HOLE COVER ASSEMBLY

    Click here

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

13. INSTALL RADIO REMOTE TUNING SWITCH ASSEMBLY

    Click here

14. INSTALL REAR CONSOLE BOX POCKET

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD)

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

16. INSTALL NO. 2 DECK BOARD (for LHD)

    Click here

17. PERFORM DIAGNOSTIC SYSTEM CHECK (for LHD)

    Click here

18. CHECK SRS WARNING LIGHT (for LHD)

    Click here