ENTRY AND START SYSTEM(for Start Function) HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   
   

   1. Confirm how vehicle was brought to workshop

      
      

      • Vehicle was driven

      • Vehicle was towed

      Tech Tips

      The malfunction location may be narrowed down by confirming whether the vehicle was driven or towed.

      Result
      Proceed to NEXT

   
   

   NEXT

2. CUSTOMER PROBLEM ANALYSIS

   Tech Tips

   
   

   • In troubleshooting, in order to check the problem symptoms accurately and judge correctly, avoid having any preconceptions. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

   • Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.

   • The following 5 items are important points for problem analysis:

     What	Vehicle model, system name
     When	Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
     Where	Whether the problem occurs at specified place
     Under what conditions?	Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine was running
     How did it happen?	Ask the customer for details about the vehicle operating conditions, environment and malfunction. Click here

   Result
   Proceed to NEXT

   
   

   NEXT

3. BASIC CHECK

   
   

   1. Measure the battery voltage.

      Standard voltage
      11 to 14 V

      Tech Tips

      
      

      • A simple method to determine whether the battery is depleted is to operate the horn.

      • If the battery voltage is below 11 V, recharge or replace the battery.

   2. Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.

   3. Check the connections of each connector and check them for deformation or damage.

      Result
      Proceed to NEXT

   
   

   NEXT

4. CHECK DTCS AND SAVE OPERATION HISTORY

   
   

   1. Using the GTS, enter the following menu and : Health Check

      Tech Tips

      
      

      • If DTCs are output, first perform troubleshooting for the DTCs

      • Save all output DTCs and operation history

      • Operation history can also be checked using the "Utility" menu of the GTS

        Click here

      Result
      Result Proceed to No DTCs are output A Wireless door lock system and entry and start system DTCs are output B DTCs other than wireless door lock system and entry and start system DTCs are output C

   
   

   B

   GO TO DIAGNOSTIC TROUBLE CODE CHART

   C

   GO TO DIAGNOSTIC TROUBLE CODE CHART

   A

5. CHECK PROBLEM SYMPTOMS

   
   

   1. Based on the customer problem analysis, check the problem symptoms.

      Click here

      Result
      Result Proceed to The problem symptom can be confirmed A The problem symptom can not be confirmed B

   
   

   B

   GO TO CHECK FOR INTERMITTENT PROBLEMS Click here

   A

6. CHECK CUSTOMIZE ITEMS

   
   

   1. Use the following customize setting methods to confirm that the entry and start system is on.

      
      

      • Check setting using GTS

      • Check setting on multi-display

      • Check setting by manual operation

      Check for the customize setting.

      Click here

   2. Use the following customize setting methods to confirm that the wireless door lock system is on.

      
      

      • Check setting using GTS

      • Check setting by manual operation

      Check for the customize setting.

      Click here

      Tech Tips

      
      

      • Even when the entry and start system is turned off in the customize setting, the engine can be started by an emergency key operation.

      • If the entry and start system or wireless door lock system is off, all entry and start functions or wireless functions do not operate.

      Result
      Result Proceed to Wireless door lock system and entry and start system are on A Entry and start system is off B Wireless door lock system is off C

   
   

   B

   GO TO CUSTOMIZE PARAMETERS Click here

   C

   GO TO CUSTOMIZE PARAMETERS Click here

   A

7. CHECK POWER DOOR LOCK CONTROL SYSTEM

   
   

   1. Check the power door lock system.

      Click here

      Result
      Result Proceed to Power door lock system operate properly A Power door lock system does not operate properly B

   
   

   B

   GO TO POWER DOOR LOCK CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

   A

8. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

   
   

   1. Check the wireless door lock system.

      Click here

      Result

      Result Proceed to All functions operate properly A Wireless lock/unlock function does not operate (entry and start function also does not operate) B Wireless lock/unlock function does not operate (entry and start function operates) C Only luggage door open function does not operate D Door ajar warning function does not operate E Answer-back (buzzer sounds* and hazard lights flash) function does not operate F After returning to vehicle, door is locked or unlocked, even though wireless operation was not performed G

      
      

      • *: w/ Wireless Door Lock Buzzer Answer-back Function

   
   

   B

   GO TO ENTRY AND START SYSTEM (for Entry Function) (All door entry lock/unlock functions and wireless functions do not operate) Click here

   C

   REPLACE ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY

   D

   GO TO LUGGAGE COMPARTMENT DOOR OPENER SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

   E

   GO TO LIGHTING SYSTEM (Door Courtesy Switch Circuit) Click here

   F

   GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (No Answer-Back) Click here

   G

   GO TO POWER DOOR LOCK CONTROL SYSTEM (Improper Operation) Click here

   A

9. CHECK ENTRY AND START SYSTEM (for Entry Function)

   
   

   1. Check the entry and start system.

      Click here

      Result

      Result Proceed to All functions operate properly A Entry lock/unlock function does not operate from all doors (wireless function also does not operate) B Entry lock/unlock function does not operate from all doors (wireless function operates)) C Entry lock function/unlock function do not operate only from driver side door D Entry lock function/unlock function do not operate only from front passenger side door E Entry lock function does not operate only from driver side door (unlock operates) F Entry lock function does not operate only from passenger side door (unlock operates) G Entry unlock function does not operate only from driver side door (lock operates) H Entry unlock function does not operate only from passenger side door (lock operates) I Luggage door open function does not operate J Luggage lock-in prevention function does not operate (Luggage compartment door does not open) K Entry and start system exterior warning and answer-back buzzer do not sound* L Entry and start system interior warning does not sound M

      
      

      • *: w/ Wireless Door Lock Buzzer Answer-back Function

   
   

   B

   GO TO ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate) Click here

   C

   GO TO ENTRY AND START SYSTEM (for Entry Function) (All Door Entry Lock/Unlock Functions do not Operate, but Wireless Functions Operate) Click here

   D

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock and Unlock Functions do not Operate) Click here

   E

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock and Unlock Functions do not Operate) Click here

   F

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Lock Function does not Operate) Click here

   G

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Lock Function does not Operate) Click here

   H

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Driver Side Door Entry Unlock Function does not Operate) Click here

   I

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Front Passenger Side Door Entry Unlock Function does not Operate) Click here

   J

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Luggage Compartment Door Entry Unlock Function does not Operate when Key is Outside Luggage Compartment) Click here

   K

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Key Luggage Compartment Lock-in Prevention Function does not Operate) Click here

   L

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Exterior Alarm and Answer-back Buzzer do not Sound) Click here

   M

   GO TO ENTRY AND START SYSTEM (for Entry Function) (Entry Interior Alarm does not Sound) Click here

   A

10. INSPECT ENTRY AND START SYSTEM

    
    

    1. Check the entry and start system.

       Click here

       Result
       Engine was started Result Proceed to All functions operate properly A Power source mode changing function does not operate (power source mode does not change to on (ACC), but changes to on (IG)) B Steering lock function does not operate C Security indicator light does not blink D
       Engine was not started Result Proceed to Push-button start function does not operate E Immobiliser function does not operate F Steering wheel can not be unlocked G Power source mode changing function does not operate (does not change to on (ACC) or on (IG)) H Power source mode changing function does not operate (changes to on (ACC), but not on (IG)) I Immobiliser function does not operate (Security Indicator light does not turn off) J

    
    

    B

    GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (ACC)) Click here

    C

    GO TO ENTRY AND START SYSTEM (for Start Function) (Steering Lock does not Lock) Click here

    D

    GO TO ENTRY AND START SYSTEM (for Start Function) (Security Indicator Light Does not Blink) Click here

    E

    GO TO ENTRY AND START SYSTEM (for Start Function) (Engine does not Start) Click here

    F

    GO TO ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly) Click here

    G

    GO TO ENTRY AND START SYSTEM (for Start Function) (Unable to Unlock Steering Wheel (Engine cannot Start)) Click here

    H

    GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG and ACC)) Click here

    I

    GO TO ENTRY AND START SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG)) Click here

    J

    GO TO ENTRY AND START SYSTEM (for Start Function) (Immobiliser System does not Operate Properly) Click here

    A

11. INSPECT ELECTRICAL KEY REGISTRATION FUNCTION

    
    

    1. Check the electrical key registration function for malfunctions.

       Click here

       Result
       Result Proceed to All functions operate properly A Cannot register new keys B Cannot register additional keys C Additional key registration display is not displayed D

    
    

    A

    CHECK FOR USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO ENTRY AND START SYSTEM (for Start Function) (New Key cannot be Registered) Click here

    C

    GO TO ENTRY AND START SYSTEM (for Start Function) (Additional Key cannot be Registered) Click here

    D

    GO TO ENTRY AND START SYSTEM (for Start Function) (New Key Registration Warning Message is not Displayed) Click here