DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body, Master Switch, Front Left Door or Front Right Door / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Engine switch on (ACC) signal | OFF or ON | OFF: Engine switch off ON: Engine switch on (ACC) or on (IG) |
"ON" is also displayed for this item when the engine switch is on (IG). |
| IG SW | Engine switch on (IG) signal | OFF or ON | OFF: Engine switch off or on (ACC) ON: Engine switch on (IG) |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
| Door Lock SW-Lock | Front passenger door control switch lock signal | OFF or ON | OFF: Lock side of front passenger door control switch not pushed ON: Lock side of front passenger door control switch pushed |
- |
| Door Lock SW-Unlock | Front passenger door control switch unlock signal | OFF or ON | OFF: Unlock side of front passenger door control switch not pushed ON: Unlock side of front passenger door control switch pushed |
- |
| Door Key SW-Lock | Driver or front passenger door key-linked switch lock signal | OFF or ON | OFF: Driver and front passenger door key cylinder not turned to lock position ON: Driver or front passenger door key cylinder turned to lock position |
- |
| Door Key SW-Unlock | Front passenger door key-linked switch unlock signal | OFF or ON | OFF: Front passenger door key cylinder not turned to unlock position ON: Front passenger door key cylinder turned to unlock position |
- |
| D Door Key SW-UL | Driver door key-linked switch unlock signal | OFF or ON | OFF: Driver door key cylinder not turned to unlock position ON: Driver door key cylinder turned to unlock position |
- |
| FR Door Lock Pos | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Courtesy light switch RH signal | OFF or ON | OFF: Front door RH closed ON: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Courtesy light switch LH signal | OFF or ON | OFF: Front door LH closed ON: Front door LH open |
- |
| Unlock Key Twice | Key-linked 2-step unlock function | OFF or ON | Customized value displayed | - |
| Auto Lock | Speed-sensitive automatic door lock function | OFF or ON | Customized value displayed | - |
| Auto Lock/Shift | Shift-linked automatic door lock function | OFF or ON | Customized value displayed | - |
| Auto Unlock/Shift | Shift-linked automatic door unlock function | OFF or ON | Customized value displayed | - |
| All Unlock/Open-Close | Driver door-linked automatic door unlock function | OFF or ON | Customized value displayed | - |
| The Number of DTC | Number of trouble codes | 0 to 255 | Number of stored DTCs displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Door Lock Switch Status | Multiplex network master switch assembly lock signal | OFF or ON | OFF: Lock side of multiplex network master switch assembly not pushed ON: Lock side of multiplex network master switch assembly pushed |
- |
| Door Unlock Switch Status | Multiplex network master switch assembly unlock signal | OFF or ON | OFF: Unlock side of multiplex network master switch assembly not pushed ON: Unlock side of multiplex network master switch assembly pushed |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Time to turn off the Door Lock Indicator (FL) | Turn off control time | 30s, 60s, 600s or 1200s | Customize setting displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Time to turn off the Door Lock Indicator (FR) | Turn off control time | 30s, 60s, 600s or 1200s | Customize setting displayed | - |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body, Front Left Door or Front Right Door / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock | Door lock motor | OFF/Unlock/Lock | - |
| D-Door Unlock | Driver door lock motor | OFF/ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock Indicator | Indicator light assembly LH | OFF/ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock Indicator | Indicator light assembly RH | OFF/ON | - |