SUB BATTERY INSTALLATION

PROCEDURE

1. INSTALL SUB-BATTERY BRACKET

   
   

   1. Install the sub-battery bracket (positive (+) terminal side) to the sub-battery module assembly with the 2 bolts.

      Torque:

      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

   2. Install the sub-battery bracket (negative (-) terminal side) to the sub-battery module assembly with the 2 bolts.

      Torque:

      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

2. INSTALL SUB-BATTERY MODULE ASSEMBLY

   
   

   1. Install the sub-battery module assembly with the 2 bolts and 2 nuts.

      Torque:

      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

   2. Connect the 2 sub-battery terminals to the sub-battery module assembly with the 2 nuts.

      Torque:

      8.7 N*m  { 89 kgf*cm, 77 in.*lbf }

3. INSTALL CONNECTOR COVER

   
   

   1. Attach the 2 claws and install connector cover to the sub-battery module assembly.

4. INSTALL NO. 2 DECK BOARD BRACKET

   Click here

5. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

8. INSTALL LUGGAGE COMPARTMENT TRIM BOX

   Click here

9. INSTALL REAR FLOOR FINISH PLATE

   Click here

10. INSTALL SIDE TRIM BOX

    Click here

11. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

12. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

13. INSTALL NO. 1 DECK BOARD

    Click here

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

15. INSTALL NO. 2 DECK BOARD

    Click here