REAR CROSSING TRAFFIC ALERT BUZZER INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR BUZZER

   
   

   1. Connect the connector.

   2. Attach the clamp to install the blind spot monitor buzzer.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   
   

   1. Pass the rear No. 1 seat outer belt assembly floor anchors through the package tray trim panel assembly.

   2. Insert the guides.

      

      Install in this Direction

      -

      -

   3. Connect the connector.

   4. Attach the clips to install the package tray trim panel assembly.

      

      Install in this Direction

      -

      -

   5. 

      	Slide in this Direction
      	Install in this Direction

      Push the vehicle front side of the belt guide to attach the guide and claw, and install the belt guide.

      Tech Tips

      Use the same procedure for the other side.

3. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH(FLOOR ANCHOR)

   Click here

4. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH(FLOOR ANCHOR)

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

   Click here

6. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

7. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

8. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH

   Click here

9. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

10. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

11. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

12. INSTALL CENTER PILLAR GARNISH ASSEMBLY LH

    Click here

13. INSTALL CENTER PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

14. INSTALL QUARTER TRIM PANEL ASSEMBLY LH

    Click here

15. INSTALL QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

16. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH(FLOOR ANCHOR)

    Click here

17. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH(FLOOR ANCHOR)

    Tech Tips

    Use the same procedure described for the LH side.

18. INSTALL OUTER LAP BELT ANCHOR COVER

    Click here

19. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

20. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

21. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

22. INSTALL REAR SEAT INNER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the rear No. 1 seat inner belt assembly LH.

23. INSTALL QUARTER INSIDE TRIM BOARD LH

    Click here

24. INSTALL QUARTER INSIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

25. INSTALL REAR SEAT ASSEMBLY

    Click here

26. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

27. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

28. INITIALIZATION OF SEAT ECU

    Click here

29. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

30. CHECK SRS WARNING LIGHT

    Click here