ULTRASONIC SENSOR(for Front) INSPECTION

PROCEDURE


  1. INSPECT FRONT CORNER ULTRASONIC SENSOR


    1. B000WRSC35
      *a

      Component without harness connected

      (Front Corner Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 20 kΩ to 40 kΩ

      If the result is not as specified, replace the front corner ultrasonic sensor.

  2. INSPECT FRONT CENTER ULTRASONIC SENSOR


    1. B000WRSC35
      *a

      Component without harness connected

      (Front Center Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 20 kΩ to 40 kΩ

      If the result is not as specified, replace the front center ultrasonic sensor.