PARKING ASSIST MONITOR SYSTEM DTC CHECK / CLEAR

CHECK DTC

1. Connect the GTS to the DLC3.

2. Turn the engine switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Chassis / IPA / Parking Assist Monitor / Trouble Codes.

   
   Chassis > IPA/Parking Assist Monitor > Trouble Codes

5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

   
   Body Electrical > Navigation System > Trouble Codes

6. Check for DTCs.

   Click here

   Note

   
   

   • C1622 is output from the radio receiver assembly. Therefore, if C1622 is output, proceed to the Problem Symptoms Table for the relevant systems.

     Refer to Audio and Visual System*1

     Click here

     Refer to Navigation System*2

     Click here

   • The radio receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

     System	Proceed to
     Audio and Visual System*1	Click here
     Navigation System*2	Click here

   
   

   • *1: w/ Audio and Visual System

   • *2: w/ Navigation System

CLEAR DTC

1. Connect the GTS to the DLC3.

2. Turn the engine switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Chassis / IPA / Parking Assist Monitor / Trouble Codes.

   
   Chassis > IPA/Parking Assist Monitor > Trouble Codes

5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

   
   Body Electrical > Navigation System > Clear DTCs

6. Clear the DTCs.