TELEPHONE ANTENNA INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 ROOF WIRE


    1. B000Z2C

      Attach the clamps to install the No. 2 roof wire.

  2. INSTALL TELEPHONE ANTENNA ASSEMBLY


    1. Attach the guides A and clip.

      B000UOTC01
      B000XM7 Nut B000TT4 Connector

    2. Install the 2 nuts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

    3. Attach the clamps to install the telephone antenna assembly and connect the 3 connectors.

  3. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSTALL NO. 2 DECK BOARD

    Click here

  6. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  7. CHECK SRS WARNING LIGHT

    Click here