GLOVE BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. B000UFPC05
      *a

      Component without harness connected

      (Glove Box Light Assembly)

      Inspect the glove box light assembly.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 2(B)

        Negative (-) → 1(L)

        		 Glove box light assembly illuminates
        If the result is not as specified, replace the glove box light assembly.