VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT BULB


    1. Remove the DOME D fuse.

    2. Using a screwdriver, insert the screwdriver into the cutout of the vanity light lens.

    3. Slightly push the screwdriver in the direction indicated by the arrow shown in the illustration to detach the claw to remove the vanity light lens.

      B000VRBC01
      B000WCG Protective Tape B000WYJ Push in this Direction
    4. B000TXM

      Remove the vanity light bulb.

  2. INSTALL VANITY LIGHT BULB


    1. Install the vanity light bulb.

    2. Set the vanity light lens in place.

    3. Attach the claw to install the vanity light lens.

      B000V9A

    4. Install the DOME D fuse.