VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VISOR BRACKET COVER LH

    Click here

  2. REMOVE VISOR ASSEMBLY LH


    1. B000V1F

      Remove the 2 screws.

    2. B000VGAC01
      B000WYJ Remove in this Direction (1)
      B000YNM Remove in this Direction (2)

      Pull in the direction of the arrow shown in the illustration (1) to detach the visor assembly LH from the visor holder LH.

    3. Pull in the direction of the arrow shown in the illustration (2) and remove the visor assembly LH.

      Note

      Do not twist or remove the visor assembly in any direction other than downwards as the connector may become damaged.