FOOTWELL LIGHT(for Driver Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. B000UFPC09
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Inspect the No. 1 interior illumination light assembly LH.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 2 (B)

        Negative (-) → 1 (E)

        		 No. 1 interior illumination light assembly LH illuminates
        If the result is not as specified, replace the No. 1 interior illumination light assembly LH.