BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS SERVICE DATA

VSC OFF Switch
Tester Connection	Condition	Specified Condition
8 (+) - 1 (E)	Switch pushed	Below 1 Ω
8 (+) - 1 (E)	Switch not pushed	10 kΩ or higher

Measurement Condition

Specified Condition

Battery positive (+) → 10 (ILL+)

Battery negative (-) → 6 (ILL-)

Illuminates

Brake Hold Switch
Tester Connection	Condition	Specified Condition
3 (+B) - 4 (E)	Switch pushed	Below 1 Ω
3 (+B) - 4 (E)	Switch not pushed	10 kΩ or higher

Measurement Condition

Specified Condition

Battery positive (+) → 2 (ILL+)

Battery negative (-) → 5 (ILL-)

Illuminates

ABS MTR NO. 1 Relay
Tester Connection	Condition	Specified Condition
3 (BM1) - 5 (+BM1)	Voltage is not applied between terminals 1 (MR1) and 2 (R1-)	10 kΩ or higher
3 (BM1) - 5 (+BM1)	Voltage is applied between terminals 1 (MR1) and 2 (R1-)	Below 1 Ω

ABS MTR NO. 2 Relay
Tester Connection	Condition	Specified Condition
3 (BM2) - 5 (+BM2)	Voltage is not applied between terminals 1 (MR2) and 2 (R2-)	10 kΩ or higher
3 (BM2) - 5 (+BM2)	Voltage is applied between terminals 1 (MR2) and 2 (R2-)	Below 1 Ω