ALIGNMENT / HANDLING DIAGNOSIS SERVICE DATA

Vehicle Height (Unloaded Vehicle)

Front A - B	Rear C - D
137.0 mm (5.39 in.)	88.0 mm (3.46 in.)

Measurement Points:

A: Ground clearance of front wheel center
B: Ground clearance of front center position of front No. 2 suspension lower arm assembly front bush installation bolt
C: Ground clearance of rear wheel center
D: Ground clearance of pin hole center of the rear suspension arm attachment sub-assembly

Camber (Unloaded Vehicle)

-	Camber Inclination	Right-left Difference
Front	0°42' +/- 0°45' (0.70° +/-0.75°)	0°45' (0.75°) or less
Rear	-1°20' +/- 0°45' (-1.33° +/- 0.75°)	0°45' (0.75°) or less

Caster (Unloaded Vehicle)

Caster Inclination	Right-left Difference
7°25' +/- 0°45' (7.42° +/-0.75°)	0°45' (0.75°) or less

Steering Axis Inclination (Unloaded Vehicle)

Steering Axis Inclination Reference
8°56' (8.93°)

Toe-in (Unloaded Vehicle)

-	Vehicle Specification			Specified Condition
Front	-			C + D: 0°00' +/- 0°09' (0.00° +/-0.15°) B - A: 0.0 +/- 2.0 mm (0 +/- 0.0787 in.)
Rear	w/o Dynamic Rear Steering			C + D: 0°14' +/- 0°09' (0.23° +/- 0.15°) B - A: 3.0 +/- 2.0 mm (0.1181 +/- 0.0787 in.)
	w/ Dynamic Rear Steering	Tire Size: 245/45RF20		C + D: 0°14' +/- 0°09' (0.23° +/- 0.15°) B - A: 3.0 +/- 2.0 mm (0.1181 +/- 0.0787 in.)
		Tire Size: 275/35RF21	for Korea	C + D: 0°00' +/- 0°09' (0.00° +/- 0.15°) B - A: 0.0 +/- 2.0 mm (0.0000 +/- 0.0787 in.)
		Tire Size: 275/35RF21	except Korea	C + D: 0°14' +/- 0°09' (0.23° +/- 0.15°) B - A: 3.0 +/- 2.0 mm (0.1181 +/- 0.0787 in.)

Wheel Turning Angle (Unloaded Vehicle)

Inside Wheel	Outside Wheel
39°07' +/- 2°00' (39.12° +/- 2°00' )	33°50' (33.83°)