2UR-GSE LUBRICATION SERVICE DATA

LUBRICATION SYSTEM
Condition	Specified Condition
Idling	70 kPa (0.7 kgf/cm², 10.2 psi) or higher
2500 rpm	220 kPa (2.2 kgf/cm², 32 psi) or higher

OIL PRESSURE SWITCH
Tester Condition	Condition	Specified Condition
1 - Switch body	Idling	10 kΩ or higher
1 - Switch body	Engine stopped	Below 1 Ω

OIL LEVEL SENSOR
Tester Condition	Condition	Specified Condition
1 - 2	ON	Below 1 Ω
1 - 2	OFF	1 kΩ or higher

OIL PUMP
Item	Condition	Specified Condition
Oil pump rotor	Standard tip clearance	0.180 to 0.300 mm (0.00709 to 0.0118 in.)
	Maximum tip clearance	0.300 mm (0.0118 in.)
	Standard side clearance	0.030 to 0.060 mm (0.00118 to 0.00236 in.)
	Maximum side clearance	0.060 mm (0.00236 in.)
	Standard body clearance	0.175 to 0.250 mm (0.00689 to 0.0984 in.)
	Maximum body clearance	0.250 mm (0.00984 in.)
Timing chain case or timing chain case oil seal	Standard depth	0 to 1.0 mm (0 to 0.0394 in.)