CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH

   
   

   1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly RH.

      Note

      Do not damage the O-ring.

   2. Install the camshaft timing oil control valve assembly RH to the cylinder head cover sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • If the camshaft timing oil control valve assembly RH has been struck or dropped, replace it.

      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly RH (connecting surface with the cylinder head cover sub-assembly).

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

   3. Connect the camshaft timing oil control valve assembly RH connector.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH

   
   

   1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly LH.

      Note

      Do not damage the O-ring.

   2. Install the camshaft timing oil control valve assembly LH to the cylinder head cover sub-assembly LH with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • If the camshaft timing oil control valve assembly LH has been struck or dropped, replace it.

      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly LH (connecting surface with the cylinder head cover sub-assembly LH).

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

   3. Connect the camshaft timing oil control valve assembly LH connector.

3. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here