CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH


    1. B000X2V

      Disconnect the camshaft timing oil control valve assembly LH connector.

    2. Remove the bolt and camshaft timing oil control valve assembly LH from the cylinder head cover sub-assembly LH.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly LH (connecting surface with the cylinder head cover sub-assembly LH).

      • If the camshaft timing oil control valve assembly LH has been struck or dropped, replace it.

    3. B000UPIC01
      *1 O-ring

      Remove the O-ring from the camshaft timing oil control valve assembly LH.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH


    1. B000UCK

      Disconnect the camshaft timing oil control valve assembly RH connector.

    2. Remove the bolt and camshaft timing oil control valve assembly RH from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly RH (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly RH has been struck or dropped, replace it.

    3. B000UPIC01
      *1 O-ring

      Remove the O-ring from the camshaft timing oil control valve assembly RH.