BLACK OUT TAPE(for Rear Door) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. REPAIR INSTRUCTION

   Click here

2. INSTALL REAR DOOR OUTSIDE STRIPE

   
   

   1. Refer to the illustration to position a new rear door outside stripe.

      

      *A	Rear Side	*B	Front Side
      *C	LH Side	*D	RH Side
      *1	Rear Door Weatherstrip	-	-
      *a	Rib of Rear Door Frame Garnish	*b	Edge of Curved Surface (A)
      *c	Edge of Curved Surface (B)	*d	Cutout
      *e	Straight	*f	Triangle

      Standard Measurement
      Area Measurement Area Measurement A 5.0 mm (0.197 in.) B 3.0 mm (0.118 in.) C 1.5 mm (0.0591 in.) D 2.5 mm (0.0984 in.) E 2.5 mm (0.0984 in.) F 1.0 mm (0.0394 in.)

   2. Remove the release paper and install the rear door outside stripe.

      Tech Tips

      Align the cutout on the rear door outside stripe with the edge of curved surface (A) on the door frame and install the rear door outside stripe.

3. INSTALL REAR DOOR LOWER OUTSIDE STRIPE

   
   

   1. Refer to the illustration to position a new rear door lower outside stripe.

      

      *A	Upper Side	*B	LH Side
      *C	RH Side	-	-
      *1	Rear Door Weatherstrip	-	-
      *a	Rib of Rear Door Frame Garnish	*b	Edge of Curved Surface
      *c	Straight	*d	Triangle

      Standard Measurement
      Area Measurement Area Measurement A 3.0 mm (0.118 in.) B 6.3 mm (0.248 in.) C 1.2 mm (0.0472 in.) D 1.0 mm (0.0394 in.) E -1.0 to 1.0 mm (-0.0394 to 0.0394 in.) F 1.0 mm (0.0394 in.)

   2. Remove the release paper and install the rear door lower outside stripe.

4. INSTALL CURTAIN HOOK (w/ Rear Door Sunshade)

   Click here

5. INSTALL REAR DOOR FRAME GARNISH

   Click here

6. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

   Click here

7. INSTALL REAR DOOR QUARTER WINDOW GLASS

   Click here

8. INSTALL REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY

   Click here

9. CONNECT REAR DOOR WEATHERSTRIP

   Click here

10. INSTALL REAR DOOR GLASS RUN

    Click here

11. INSTALL REAR DOOR PANEL PROTECTOR

    Click here

12. INSTALL REAR DOOR NO. 1 VENT SEAL

    Click here

13. INSTALL REAR DOOR SERVICE HOLE COVER

    Click here

14. INSTALL REAR DOOR NO. 2 SERVICE HOLE COVER

    Click here

15. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

    Click here

16. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

17. INSTALL REAR ARMREST ASSEMBLY

    Click here

18. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL

    Click here

19. INSTALL REAR DOOR ARMREST COVER SUB-ASSEMBLY

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    for 2AR-FE:

    Click here

    for A25A-FKS:

    Click here

    for 2GR-FKS:

    Click here

21. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

22. INSPECT POWER WINDOW OPERATION

    Click here