ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT ROCKER PANEL MOULDING END COVER

    Click here

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

      B004LC9C01
      B006Y8C Protective Tape - -

    2. Remove the 8 clips.

      B004L4Z

    3. Remove the 6 screws.

      B004LCLC01
      *1 Grommet - -

    4. Remove the grommet

    5. Disengage the 9 clips to remove the rocker panel moulding as shown in the illustration.

      B004L4SC01
      B006ZFL Remove in this Direction - -