HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

   Note

   If the rear height control sensor sub-assembly LH has been struck or dropped, replace it with a new one.

   
   

   1. Engage the 2 guides.

   2. Install the rear height control sensor sub-assembly LH with the 2 bolts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   3. Connect the connector.

2. INSTALL REAR WHEEL (for LH Side)

   Click here

3. PERFORM INITIALIZATION

   Click here

4. INSPECT HEADLIGHT AIMING

   for LED Type Turn Signal Light:

   Click here

   for Bulb Type Turn Signal Light:

   Click here