REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. for LED Type Back-up Light or Type A Bulb Type Back-up Light:


      1. B0070G9

        Engage the clip.

      2. Install the rear light assembly with the 3 nuts.

        Torque:
        7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      3. Connect the connector.

    2. for Type B Bulb Type Back-up Light:


      1. B0070FW

        Engage the clip.

      2. Install the rear light assembly with the 3 nuts.

        Torque:
        7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      3. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here